聯系我們
咨詢熱線：020-36703438
電話：020-36703438
傳真：020-36703488
郵箱：ccsopower@163.com
地址：廣州市白云區夏花二路29號（舊廣花路段）
當前位置: 首頁
» 新聞中心
負極板硫酸鹽化對電池的影響 |
| 電池負極板硫酸鹽化就是負極上PbSO4不可逆變?yōu)?/SPAN>PbO2和Pb。難以充電復原。負極硫酸鹽化原因較多：長期欠充、負極去極化、放電后未及時充電、電解液濃度太高、電解液的層化現象，都會引起負極硫酸鹽化。電解液層化即濃度差異，濃度過高與濃度過稀都屬于硫酸的鈍化濃度區，只有濃度適當?shù)膮^(qū)域才有活性，本質是降低了活性物質的利用率。充電反應是放電的逆反應，由于電解液濃差，充電反應只在合適濃度區內進行，大大降低了充電效率，即充電難以進行。由此可以看到：隨著持續充／放循環與經年浮充，就有越來越多的PbSO4沉積在電池槽底，伴隨電解液濃度增加，硫酸鉛結晶粗化，硫酸鹽化就嚴重。 The battery anode plank vitriol turns be can not go against to change into PbO2 and Pb on PbSO4 of anode.It is hard to refresh to recover.The anode vitriol turns reason more:After owing Chong and anode to turn, turn on electricity very much over a long period of time don't refresh in time, the electrolyte density is too high, the layer of electrolyte will arouse anode vitriol's turning to turn a phenomenon.The electrolyte layer turns namely density difference, density lead Gao and density over sparse all belong to the bluntness of sulfuric acid to turn density area, only density adequacy of there is just activity in district, the essence is the utilization that lowered activity material.Refresh to respond to is the adverse reaction for turning on electricity, thick bad because of electrolyte, refresh reaction carries on in the suitable density area and consumedly lowers to refresh an efficiency, then refresh hard carry on.Can see from here:Along with keep on Chong/put circulation with after one year float Chong, have more and more PbSO4s deposition at battery slot bottom, accompany with an electrolyte density to increase, the sulfuric acid lead crystallizes thick turn, the vitriol turns severity. |
-> 蓄電池閱讀相關文章 |
| 1 叉車電池極板制造器械-灌粉機與擠膏機 |
| 2 牽引鉛酸蓄電池涂片機 |
| 3 如何防止蓄電池極板上鉛膏開裂？ |
| 4 蓄電池鉛膏干燥過程中的變化 |
| 5 蓄電池鉛粉生產的工藝 |